Wednesday, September 18, 2013; 11:00 AM - 12:00 PM Eastern
This webinar will provide an overview of a new industry standard, SSPC-PA 14: Field Application of Plural Component Polyurea and Polyurethane Thick Film Coatings to Concrete and Steel. The standard is intended for use by specifiers and facility owners in a manner similar to SSPC-PA 1. It supplements application instructions provided by coating manufacturers to ensure that recommended best practice is followed when applying polyurethane and polyurea plural component coatings.
Dudley Primeaux, Director of Education and Development
Dudley Primeaux is the Director of Education and Development with VersaFlex Incorporated in Kansas City, Kansas. He has a B.S. and M.S. Degrees in Chemistry from Lamar University in Beaumont, Texas, and was employed by Texaco Chemical Company, Huntsman Corporation, a prior Partner in EnviroChem Technologies, LLC, and owner of Primeaux Associates LLC.
Dudley is active in NACE, SSPC: The Society for Protective Coatings and has also completed the SSPC-PCS, Protective Coatings Specialist and CCI Concrete Coatings Inspector certifications. Dudley also serves at Chairman of the SSPC C.1.9 Polyurea Committee. He is a recent recipient of the JPCL’s Top Thinkers: The Clive Hare Honors, the 2012 Wayne Kraus Technical Award, Philadelphia Society for Coating Technology (PSCT) and the 2013 SSPC Coating Education Award. He is named inventor of 28 US Patents and 8 European Patents on polyurethane and polyurea foam applications as well as polyurea spray elastomer systems/applications. He is an accomplished author having over 50 technical publications relating to the polyurea elastomeric coating and lining technology, performance testing and inspection, as well as several chapters in SSPC delivered book publications.
DeFelsko, a U.S. manufacturer of Coating Thickness Gages and Inspection Instruments, provides Simple, Durable, Accurate gages designed specifically for the polyurea industry including the PosiTector 6000 and PosiTector 200 series.
The PosiTector 6000 is ideal for measuring thick protective coatings up to 2.5 inches on metals while the NEW PosiTector 200 measures up to 300 mils of polyurea on concrete. Additionally, DeFelsko offers the PosiTest Pull-Off Adhesion Tester for measuring the bond strength of coatings to rigid substrates and the PosiTector Dew Point Meter to measure and record climatic conditions before, during and after coating application.
Visit www.defelsko.com to get assistance selecting the optimal instrument for your application.
VersaFlex Incorporated formulates, manufactures and supplies pure polyurea coatings, liners and sealants for a wide variety of industrial, commercial and maintenance environments. Their knowledge of 100% solids technology assures you of state of the art product utilization and support.
New resins from BASF will have metals loving water:
Excellent corrosion resistance, low VOC, high gloss, thin films basf.us/industrialcoatings
Best NSF 61.5 Approved Potable Water Polyurea
VersaFlex Polyurea Earns Highest ANSI/NSF 61.5 Rating for High Temp Service, Minimum Tank Size and Max Thickness. All Polyureas Are Not Created Equal. FREE WHITE PAPER.
Does your Paint company know where your Paint is?
If your paint company is Sherwin-Williams it does.
Leave Nothing to Chance
have been used to protect some of the most important bridges in the country; learn about our NEPCOAT-approved system as well as our entire range of MCU coatings and Polyurea membranes.
PosiTector 6000 Coating Thickness Gage easily converts to a surface profile gage, dew point meter or ultrasonic wall thickness gage with a simple probe change.
NO FLASH RUST -
Our HoldTight®102 salt remover & flash rush inhibitor prevents flash rust by removing surface contaminants.
Contact us for your nearest distributor. (800) 319.8802 email@example.com
Global Leader In Thermal Insulating Coatings
Our coatings are uniquely engineered and manufactured in-house to fulfill market-specific needs, enhance energy retention, prevent CUI and protect personnel.