PaintSquare.com


The First Word in Protective & Marine Coatings

A Product of Technology Publishing / PaintSquare
JPCL | PaintSquare News | Durability + Design | Paint BidTracker

ISO (443)

Search Standards | Back to all Standards

Manufacturing Engineering (167)

- Specification for hard anodic oxidation coatings on aluminium and its alloys

- Metallic and other inorganic coatings -- Measurement of mass per unit area -- Review of gravimetric and chemical analysis methods

- Anodized aluminium and aluminium alloys -- Visual determination of image clarity of anodic oxidation coatings -- Chart scale method

- Anodized aluminium and aluminium alloys -- Instrumental determination of image clarity of anodic oxidation coatings -- Instrumental method

- Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates -- Rating of test specimens and manufactured articles subjected to corrosion tests

- Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates -- Rating of test specimens and manufactured articles subjected to corrosion tests

- Metallic coatings -- Review of porosity tests

- Metallic coatings -- Porosity tests -- Ferroxyl test

- Chemical conversion coatings -- Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys

- Metallic and other inorganic coatings -- Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods -- Inclined wedge method

- ISO 10683:2000 Fasteners -- Non-electrolytically applied zinc flake coatings

- Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 1: General introduction and classification

- Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 2: Chilled-iron grit

- Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 3: High-carbon cast-steel shot and grit

- Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 4: Low-carbon cast-steel shot

- Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 1: Sampling

- Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 2: Determination of particle size distribution

- Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 3: Determination of hardness

- Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 4: Determination of apparent density

- Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 5: Determination of percentage defective particles and of microstructure

- Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 6: Determination of foreign matter

- Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 7: Determination of moisture

- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 1: General introduction and classification

- ISO 11126-1:1993/Cor 1:1997

- ISO 11126-1:1993/Cor 2:1997

- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 10: Almandite garnet

- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 3: Copper refinery slag

- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 4: Coal furnace slag

- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 5: Nickel refinery slag

- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 6: Iron furnace slag

- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 7: Fused aluminium oxide

- ISO 11126-7:1995/Cor 1:1999

- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 8: Olivine sand

- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 9: Staurolite

- Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 1: Sampling

- ISO 11127-2:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 2: Determination of particle size distribution

- ISO 11127-3:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 3: Determination of apparent density

- ISO 11127-4:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 4: Assessment of hardness by a glass slide test

- ISO 11127-5:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 5: Determination of moisture

- ISO 11127-6:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 6: Determination of water-soluble contaminants by conductivity measurement

- ISO 11127-7:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 7: Determination of water-soluble chlorides

- ISO 11408:1999 Chemical conversion coatings -- Black oxide coating on iron and steel -- Specification and test methods

- ISO 12686:1999 Metallic and other inorganic coatings -- Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish

- ISO 12687:1996 Metallic coatings -- Porosity tests -- Humid sulfur (flowers of sulfur) test

- ISO 12944-4:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 4: Types of surface and surface preparation

- ISO 14231:2000 Thermal spraying -- Acceptance inspection of thermal spraying equipment

- ISO 14232:2000 Thermal spraying -- Powders -- Composition and technical supply conditions

- ISO 1460:1992 Metallic coatings -- Hot dip galvanized coatings on ferrous materials -- Gravimetric determination of the mass per unit area

- ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles -- Specifications and test methods ISO 1461:1999 Hot dip galvanized coatings on fabricated iron and steel articles -- Specifications and test methods

- Metallic and oxide coatings -- Measurement of coating thickness -- Microscopical method

- ISO 1463:2003 Metallic and oxide coatings -- Measurement of coating thickness -- Microscopical method

- ISO 14647:2000 Metallic coatings -- Determination of porosity in gold coatings on metal substrates -- Nitric acid vapour test

- ISO 14656:1999 Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete

- Protection against corrosion of iron and steel in structures -- Zinc and aluminium coatings -- Guidelines

- ISO 14916:1999 Thermal spraying -- Determination of tensile adhesive strength

- ISO 14917:1999 Thermal spraying -- Terminology, classification

- ISO 14918:1998 Thermal spraying -- Approval testing of thermal sprayers Thermal spraying -- Approval testing of thermal sprayers Thermal spraying -- Approval testing of thermal sprayers

- ISO 14919:2001 Thermal spraying -- Wires, rods and cords for flame and arc spraying -- Classification -- Technical supply conditions

- ISO 14920:1999 Thermal spraying -- Spraying and fusing of self-fluxing alloys

- ISO 14921:2010 Thermal spraying -- Procedures for the application of thermally sprayed coatings for engineering components

- ISO 14922-1:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 1: Guidance for selection and use

- ISO 14922-2:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 2: Comprehensive quality requirements

- ISO 14922-3:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 3: Standard quality requirements

- ISO 14922-4:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 4: Elementary quality requirements

- ISO 15720:2001 Metallic coatings -- Porosity tests -- Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography

- ISO 15721:2001 Metallic coatings -- Porosity tests -- Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour

- ISO 15724:2001 Metallic and other inorganic coatings -- Electrochemical measurement of diffusible hydrogen in steels -- Barnacle electrode method

- ISO 15730:2000 Metallic and other inorganic coatings -- Electropolishing as a means of smoothing and passivating stainless steel

- ISO 2063:1991 Metallic and other inorganic coatings -- Thermal spraying -- Zinc, aluminium and their alloys

- Metallic and other inorganic coatings -- Thermal spraying -- Zinc, aluminium and their alloys

- ISO 2064:1996 Metallic and other inorganic coatings -- Definitions and conventions concerning the measurement of thickness

- ISO 2080:2008 Surface treatment and metallic coatings -- General classification of terms

- ISO 2080:2008 Electroplating and related processes -- Vocabulary

- ISO 2081:2008 Metallic coatings -- Electroplated coatings of zinc on iron or steel

- ISO 2082:2008 Metallic coatings -- Electroplated coatings of cadmium on iron or steel

- ISO 2085:2010 Anodizing of aluminium and its alloys -- Check of continuity of thin anodic oxide coatings -- Copper sulphate test

- ISO 2093:1986 Electroplated coatings of tin -- Specification and test methods

- ISO 2106:2011 Anodizing of aluminium and its alloys -- Determination of mass per unit area (surface density) of anodic oxide coatings -- Gravimetric method

- ISO 2106:2011

- ISO 2135:2010 Anodizing of aluminium and its alloys -- Accelerated test of light fastness of coloured anodic oxide coatings using artificial light

- ISO 2143:2010 Anodizing of aluminium and its alloys -- Estimation of loss of absorptive power of anodic oxide coatings after sealing -- Dye spot test with prior acid treatment

- ISO 2177:2003 Metallic coatings -- Measurement of coating thickness -- Coulometric method by anodic dissolution

- ISO 2178:1982 Non-magnetic coatings on magnetic substrates -- Measurement of coating thickness -- Magnetic method

- ISO 2179:1986 Electroplated coatings of tin-nickel alloy -- Specification and test methods

- ISO 2360:2003 Non-conductive coatings on non-magnetic basis metals -- Measurement of coating thickness -- Eddy current method

- ISO 2361:1982 Electrodeposited nickel coatings on magnetic and non-magnetic substrates -- Measurement of coating thickness -- Magnetic method

- ISO 2376:2010 Anodization (anodic oxidation) of aluminium and its alloys -- Insulation check by measurement of breakdown potential

- ISO 27874:2008 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 4: Determination of gold content

- ISO 27874:2008 Metallic coatings -- Electrodeposited gold and gold alloy coatings for engineering purposes

- ISO 27874:2008 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 1: Determination of coating thickness

- ISO 2819:1980 Metallic coatings on metallic substrates -- Electrodeposited and chemically deposited coatings -- Review of methods available for testing adhesion

- ISO 2931:2010 Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxide coatings by measurement of admittance or impedance

- ISO 3210:2010 Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxide coatings by measurement of the loss of mass after immersion in phosphoric-chromic acid solution

- ISO 3211:2010 Anodizing of aluminium and its alloys -- Assessment of resistance of anodic oxide coatings to cracking by deformation

- ISO 3497:2000 Metallic coatings -- Measurement of coating thickness -- X-ray spectrometric methods

- ISO 3543:2000 Metallic and non-metallic coatings -- Measurement of thickness -- Beta backscatter method

- ISO 3613:2010 Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys -- Test methods

- ISO 3861:2005 Rubber hoses for sand and grit blasting -- Specification

- ISO 3868:1976 Metallic and other non-organic coatings -- Measurement of coating thicknesses -- Fizeau multiple-beam interferometry method

- ISO 3868:1976 Metallic and other non-organic coatings -- Measurement of coating thicknesses -- Fizeau multiple-beam interferometry method

- ISO 3882:1986 Metallic and other non-organic coatings -- Review of methods of measurement of thickness

- ISO 3882:2003 Metallic and other non-organic coatings -- Review of methods of measurement of thickness

- ISO 3892:2000 Conversion coatings on metallic materials -- Determination of coating mass per unit area -- Gravimetric methods

- ISO 4516:2002 Metallic and other inorganic coatings -- Vickers and Knoop microhardness tests

- ISO 4518:1980 Metallic coatings -- Measurement of coating thickness -- Profilometric method

- ISO 4519:1980 Electrodeposited metallic coatings and related finishes -- Sampling procedures for inspection by attributes

- ISO 4520:1981 Chromate conversion coatings on electroplated zinc and cadmium coatings

- ISO 4521:2008 Metallic coatings -- Electrodeposited silver and silver alloy coatings for engineering purposes

- ISO 4521:2008 Metallic coatings -- Test methods for electrodeposited silver and silver alloy coatings -- Part 1: Determination of coating thickness

- ISO 4521:2008 Metallic coatings -- Test methods for electrodeposited silver and silver alloy coatings -- Part 2: Adhesion tests

- ISO 4521:2008 Metallic coatings -- Test methods for electrodeposited silver and silver alloy coatings -- Part 3: Determination of the presence of residual salts

- ISO 4524-2:2000 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 2: Environmental tests

- ISO 4524-2:2000 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 2: Mixed flowing gas (MFG) environmental tests

- ISO 4524-3:1985 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 3: Electrographic tests for porosity

- ISO 4524-6:1988 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 6: Determination of the presence of residual salts

- ISO 4526:2004 Metallic coatings -- Electroplated coatings of nickel for engineering purposes

- Autocatalytic nickel-phosphorus coatings -- Specification and test methods

- ISO 4536:1985 Metallic and non-organic coatings on metallic substrates -- Saline droplets corrosion test (SD test)

- ISO 4536:1985 Metallic and non-organic coatings on metallic substrates -- Saline droplets corrosion test (SD test)

- ISO 4538:1978 Metallic coatings -- Thioacetamide corrosion test (TAA test)

- ISO 4539:1980 Electrodeposited chromium coatings -- Electrolytic corrosion testing (EC test)

- ISO 4541:1978 Metallic and other non-organic coatings -- Corrodkote corrosion test (CORR test)

- ISO 4541:1978 Metallic and other non-organic coatings -- Corrodkote corrosion test (CORR test)

- ISO 4543:1981 Metallic and other non-organic coatings -- General rules for corrosion tests applicable for storage conditions Metallic and other non-organic coatings -- General rules for corrosion tests applicable for storage conditions

- ISO 4543:1981 Metallic and other non-organic coatings -- General rules for corrosion tests applicable for storage conditions

- Paints and varnishes -- Terms and definitions for coating materials -- Part 3: Surface preparation and methods of application

- Anodizing of aluminium and its alloys -- Determination of the fastness to ultra-violet light of coloured anodic oxide coatings

- ISO 6719:2010 Anodized aluminium and aluminium alloys -- Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments

- ISO 6988:1985 Metallic and other non organic coatings -- Sulfur dioxide test with general condensation of moisture

- ISO 6988:1985 Metallic and other non organic coatings -- Sulfur dioxide test with general condensation of moisture

- ISO 7583:1986 Anodizing of aluminium and its alloys -- Vocabulary

- ISO 7587:1986 Electroplated coatings of tin-lead alloys -- Specification and test methods

- ISO 7599:2010 Anodizing of aluminium and its alloys -- General specifications for anodic oxide coatings on aluminium

- ISO 7668:2010 Anodized aluminium and aluminium alloys -- Measurement of specular reflectance and specular gloss at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees

- ISO 7759:2010 Anodizing of aluminium and its alloys -- Measurement of reflectivity characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer

- ISO 7989:2006 Zinc coatings for steel wire

- ISO 8251:2011 Anodized aluminium and aluminium alloys -- Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus

- ISO 8251:2011 Anodized aluminium and aluminium alloys -- Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus

- ISO 8401:1986 Metallic coatings -- Review of methods of measurement of ductility

- ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades………..

- ISO 8501-1:2007 Representative photographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives

- ISO 8501-2:1994 Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coat

- ISO 8501-3:2006 Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 3: Preparation grades of welds, cut edges and other areas with surface imperfections

- ISO 8502-2:2005 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 2: Laboratory determination of chloride on cleaned surfaces

- ISO 8502-3:1992 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method

- ISO 8502-4:1993 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 4: Guidance on the estimation of the probability of condensation prior to paint application

- ISO 8502-5:1998 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method

- ISO 8502-6:2006 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 6: Extraction of soluble contaminants for analysis -- The Bresle method

- ISO 8502-8:2001 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 8: Field method for the refractometric determination of moisture

- ISO 8502-9:1998 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 9: Field method for the conductometric determination of water-soluble salts

- ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 1: Specifications and definitions for ISO surface profile comparators……..

- ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 2: Method for the grading of surface profile of abrasive blast-cleaned st

- ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 3: Method for the calibration of ISO surface profile comparators and for

- ISO 8504-1:2000 Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 1: General principles

- ISO 8504-2:2000 Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 2: Abrasive blast-cleaning

- ISO 8504-3:1993 Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 3: Hand- and power-tool cleaning

- ISO 8993:2010 Anodized aluminium and aluminium alloys -- Rating system for the evaluation of pitting corrosion -- Chart method

- ISO 8994:2011 Anodized aluminium and aluminium alloys -- Rating system for the evaluation of pitting corrosion -- Grid method

- ISO 9220:1988 Metallic coatings -- Measurement of coating thickness -- Scanning electron microscope method

- ISO 9587:2007 Metallic and other inorganic coatings -- Pretreatments of iron or steel to reduce the risk of hydrogen embrittlement

- ISO 9587:2007 Metallic and other inorganic coatings -- Pretreatments of iron or steel to reduce the risk of hydrogen embrittlement

- Metallic and other inorganic coatings -- Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement

- Metallic and other inorganic coatings -- Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement

- ISO 9717:2010 Phosphate conversion coatings for metals -- Method of specifying requirements

- ISO/TR 11728:1993 Anodized aluminium and aluminium alloys -- Accelerated test of weather fastness of coloured anodic oxide coatings using cyclic artificial light and pollution gas

- ISO/TR 15235:2001 Preparation of steel substrates before application of paints and related products -- Collected information on the effect of levels of water-soluble salt contamination

- ISO/TR 8125:1984 Anodizing of aluminium and its alloys -- Determination of colour and colour difference of coloured anodic coatings

(Back to all Standards)
 
   

International Paint LLC
Our New Protective Coatings Centers
Our complete range of International and Devoe Coatings products are available at our Protective Coatings Centers, making purchases faster and easier.

US Minerals
US Minerals -
Black Magnum
With nationwide production and distribution capabilities, U.S. Minerals supplies a complete range of coal slag and other abrasives to meet all of your blasting needs.

Atlantic Design, Inc.
We’re Ahead of the Game Now!
ADI has been in production all winter and our newest equipment lines are now in stock and ready to go. Buy, rent, or trade, but they will be going fast! 866.Call.ADI

DRYCO
Climate Control...delivered.
Temporary climate control equipment. Dehumidifiers,
Heaters, A/C, Power, More…
Toll Free: 866-379-2600

Abrasives Inc.
Need abrasives FAST?
Emergencies happen – who bails you out? One call to Abrasives Inc. and it's taken care of. Period. Sales support available 24/7.
800-584-7524

Sherwin-Williams
Ask Sherwin-Williams
Does your Paint company know where your Paint is?
If your paint company is Sherwin-Williams it does.
Leave Nothing to Chance

MSA (The Safety Company)
Free Whitepaper: Confined Space Safety
Download a whitepaper on hazards and PPE for working in confined spaces from the safety experts at MSA.

 
 
 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker JPCL Europe
 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2013, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com